Hydro Mix

Easy to use

Provides superior penetration

Sticks to soil surface

Retains moisture longer

Improve Your Slurry in a Hurry…Naturally

HYDRO MIX is a Patented high quality all-natural all-purpose tackifier consisting primarily of food grade vegetable gum. HYDRO MIX mixes quickly and easily with water, seed and mulch to produce lump-free slurry. HYDRO MIX fuses the individual components of the slurry into a unified consistency.

Before applying HYDRO MIX

hydro-Hwy-92-B-200

After applying HYDRO MIX

hydromix-hwy-92-A-200

HYDRO MIX forms a stabilizing top-crust, which protects seeds from the damaging effects of the sun, provides superior water penetration into the topsoil and allows oxygen exchange without rapid moisture evaporation. HYDRO MIX can be used in a one or two-step seeding process depending on the specification. It may be applied as a stand-alone tackifier at the same rates used in a seeding or mulching process.

  • Provides superior penetration into mulch & topsoil
  • Sticks to soil surface without runoff
  • Deeply penetrates wood fibers
  • Enables the slurry to spray without clogging
  • Mixes quickly
  • Enhances viscosity
  • Stabilizes water on contact
  • Retains moisture longer
  • Minimizes overspray
  • Easy to use

Pricing: Available in 9 pound plastic bags.

Directions: Mix the appropriate amount of HYDRO MIX into a full mixing tank after all other components have been added, agitate mixture thoroughly.

Amount: For hydroseeding use from 18 lbs. per acre, up to 42 lbs. per acre. The amount to use will vary depending upon environmental and slope conditions. For Bare Root Spraying use 2 oz. per 10 gallons of water.

  • 2:1 to 1:1 slope -45lbs/Acre
  • 3:1 to 2:1 slope -27lbs/Acre
  • Flat to 3:1 slope -18lbs/Acre

Storage and Handling: Store in a cool dry area.

About DRiWATER

DriWater is a 100% natural, non toxic product used for watering plants. It was invented by a well known food chemist who recognized the potential of cellulose gum he was using to thicken peanut butter. He tested and applied his theory that water could be suspended as a gel and released over time as naturally occurring microbes in the soil fed on the cellulose and released the suspended water into the soil.

The patented DRiWATER product is made from 98% purified water and 2% food grade ingredients. The food grade ingredients bind the water into a solid gel that provides consistent subsurface irrigation to plants for up to three months. DRiWATER is not an absorbent polymer nor a wetting agent-DRiWATER is natural and environmentally safe.

Providing continual moisture delivery without the cost and need of installing remote drip systems that have a tendency to malfunction in remote environments due to pests, landslides, and blockages. Our customers have reported increased survival rates of transplants using DriWater in comparison to drip alone.

DriWater is also useful in establishing native plant material where permanent irrigation is not required, and for new plant material in existing landscape areas.

DRiWATER Plus

Contains 97.6% potable water 2% cellulose gum, .16% aluminum sulfate, .04% sodium benzoate, .05% acetic acid, and .11% zinc sulfate.

DRiWATER Thrive

Contains 97.6% potable water 2% cellulose gum, .15% aluminum sulfate, .04% sodium benzoate, .025% acetic acid, .056% zinc sulfate

© 2012 DRiWATER | 1042 Hopper Avenue | Santa Rosa, CA | U.S.A 95403 | (707) 588-1444 | Contact